Call Charles 0418 641 566
Email: sales@catford.com.au Jamestown SA 5491

5/5

Double Acting & Single Acting Hydraulic Power Packs DC with Pendant or Wireless Controllers

At Catford Engineering we offer a wide range of hydraulic products. Browse our DC Hydraulic Power Packs and Wireless Pendant Controllers specifications and pricing below.

If you require a quotation or have any questions, get in touch with our friendly hydraulic experts today.

Call Charles 0418 641 566

Lot 25, Mannanarie Road,
Jamestown SA PO Box 178 , Jamestown SA 5491
iso compliance quality guarantee stamp with check mark

ISO 3834-2 (Fusion Welding Process)

Hydraulic Cylinder Packs DC Pricing

Catford 1.6Kw 12v DC Hydraulic Power Pack 3.8 Litre Tank P&T (Double Acting)

Features & Specifications

           Features 

  • These DC Power Pack Units can be mounted horizontally or vertically. (DC Motor up)
  • These DC Power Pack Units have been designed for double-acting hydraulic cylinders on log splitters, tailgate loaders, ute tipper trays, ramps on low loaders, small cranes or for any double-acting hydraulic cylinders that are used intermittently.
    Specifications 

    DC Motor
    *Power: 1.6kw. Volts: 12Volts
    *Motor RPM: 2600
    *Duty Cycle:   S2:3 min @ 170 Bar 2465 PSI, 206 amps.
    *Allowable run time 180 seconds, cool down time 720 seconds
    *Safety Thermostat installed to prevent overheating

     

    Hydraulic Pump

    *Pump:  2.1cc/rev

    *Flow:    4.7LPM @ 170 *Bar (2465 PSI)

    *Outlet Ports: 3/8” BSPP Port Size

    *Double Acting P and T

    *Relief Valve Setting: 170 Bar (2465 PSI)

    *Operating Pressure: 170 Bar (2465 PSI)

    *Maximum Pressure: 170 Bar (2465 PSI)

    *Oil Tank:  3.8 Litre Round

     

     
1.6kw hydraulic power pack 3.8 litre

All our DC Power Packs are certified worldwide with the following ISO standard:

  • ISO 9001-2008 Standard
  • ISO 14001 & OSHAS 18001
  • ISO 3834-2 (welding process)
  1. 1.6Kw P&T (Double Acting)
    (Part Number: 1612PTDC38) – $880 Inc GST
  2. 1.6Kw P&T (Double Accting) One Station with double solenoid pendant controller with 3 metre cord.(Part Number: P1612PTDC381S) – $1,100 Inc GST
  3. 1.6Kw (Double Acting) Two Station with double solenoid pendant controller with 3 metre cord.(Part Number: P1612PTDC382S) – $1,342 Inc GST
  4. 1.6Kw P&T (Double Acting) Three Station with double solenoid pendant controller with 3 metre cord.(Part Number: P1612PTDC383S) – $1,705 Inc GST

Catford 2.2Kw 12v DC Hydraulic Power Pack 3.8 Litre Tank P&T (Double Acting)

Features & Specifications

          Features

  • These DC Power Pack Units can be mounted horizontally or vertically. (DC Motor up)
  • These DC Power Pack Units have been designed for double-acting hydraulic cylinders on log splitters, tailgate loaders, ute tipper trays, ramps on low loaders, small cranes or for any double-acting hydraulic cylinders that are used intermittently.


    Specifications
      DC Motor
    *Power: 2.2kw. Volts: 12 volts
    *Motor RPM: 2600
    *Duty Cycle:   S2:1 min @ 200Bar (2900PSI), 294amps.
    *Allowable run time 60 seconds, cool down time 720 seconds
    *Safety Thermostat installed to prevent overheating

      Hydraulic Pump
    *Pump: 2.1cc/rev
    *Flow: 4.9LPM @ 200 Bar (2900 PSI)
    *Outlet Ports: 3/8” BSPP *Port Size
    *Double Acting P and T
    *Relief Valve Setting: 200 Bar (2900 PSI)
    *Operating Pressure: 200 Bar (2900 PSI)
    *Maximum Pressure: 250 Bar (3625 PSI)
    *Oil Tank:  3.8 Litre Round

2.2kw hydraulic power pack 3.8 litre

All our DC Power Packs are certified worldwide with the following ISO standard:

  • ISO 9001-2008 Standard
  • ISO 14001 & OSHAS 18001
  • ISO 3834-2 (welding process)
  1. 2.2Kw P&T (Double Acting)
    (Part Number: 2212PTDC38) – $990 Inc GST
  2. 2.2Kw P&T (Double Acting) One Station with double solenoid pendant controller wth 3 metre code.
    (Part Number: P2212PTDC381S) – $1,210 Inc GST
  3. 2.2Kw P&T (Double Acting) Two Station with double solenoid pendant controller with 3 metre cord.
    (Part Number: P2212PTDC382S) – $1,419 Inc GST
  4. 2.2Kw P&T (Double Acting) Three Station with duble solenoid pendant controller wth 3 metre cord.
    (Part Number: P2212PTDC383S) – $1,782 Inc GST

Catford 2.2Kw 12v DC Hydraulic Power Pack 7.5 Litre Tank (Single Acting) with Pendant

Features & Specifications

          Features

  • These DC Power Pack Units can be mounted horizontally or vertically. (DC Motor up)
  • These DC Power Pack Units have been designed for single acting hydraulic cylinders on log splitters, tail gate loaders, ute tipper trays, ramps on low loaders, small cranes or for any single acting hydraulic cylinders that is used intermittently.

    Specifications

     DC Motor
    *Power:  2.2kw. Volts: 12 volts Motor RPM: 2600
    *Duty Cycle:   S2:1 min @ 200 Bar (2900PSI), 294amps.
      Allowable run time 60 seconds, cool down time 720 seconds
    *Safety Thermostat installed to prevent overheating

    Hydraulic Pump
    *Pump: 2.1cc/rev
    *Flow: 4.7LPM @ 200 Bar (2900 PSI)
    *Outlet Ports: 3/8” BSPP Port Size
    *Single Acting with two button pendant controller with 3 metre cord
    *Relief Valve Setting: 200 Bar (2900 PSI)
    *Operating Pressure: 200 Bar (2900 PSI)
    *Maximum Pressure: 250 Bar (3625 PSI)
    *Oil Tank: 7.5 Litre Round

2.2kw hydraulic power pack 7.5 litre

All our DC Power Packs are certified worldwide with the following ISO standard:

  • ISO 9001-2008 Standard
  • ISO 14001 & OSHAS 18001
  • ISO 3834-2 (welding process)
Part Number: P2212SDC38 – $1,122 Inc GST

Catford 3Kw 24v DC Hydraulic Power Pack 3.8 Litre Tank P&T (Double Acting)

Features & Specifications

          Features

  • These DC Power Pack Units can be mounted horizontally or vertically. (DC Motor up)
  • These DC Power Pack Units have been designed for double-acting hydraulic cylinders on log splitters, tail gate loaders, ute tipper trays, ramps on low loaders, small cranes or for any double-acting hydraulic cylinders that are used intermittently.

    Specifications

      DC Motor
    *Power: 3kw. Volts: 24 volt
    *Motor RPM: 3000
    *Duty Cycle:   S2:4 min @ 200Bar / 2900PSI, 143amps.
    Allowable run time 240 seconds, cool down time 720 seconds
    *Safety Thermostat installed to prevent overheating

      Hydraulic Pump
    *Pump: 2.1cc/rev
    *Flow: 6.2LPM @ 200 Bar (2900 PSI)
    *Outlet Ports: 3/8” BSPP Port Size
    *Double Acting P and T
    *Relief Valve Setting: 200 Bar (2900 PSI)
    *Operating Pressure: 200 Bar (2900 PSI)
    *Maximum Pressure: 250 Bar (3625 PSI)
    *Oil Tank: 3.8 Litre Round

3kw hydraulic power pack 3.8 litre

All our DC Power Packs are certified worldwide with the following ISO standard:

  • ISO 9001-2008 Standard
  • ISO 14001 & OSHAS 18001
  • ISO 3834-2 (welding process)
  1. 3Kw P&T (Double Acting)
    (Part Number: 324PTDC38) – $1,298 Inc GST
  2. 3Kw P&T (Double Acting) One Station with double solenoid pendant controller with 3 metre cord.
    (Part Number: P324PTDC381S) – $1,672 Inc GST
  3. 3Kw P&T (Double Acting) Two Station with double solenoid pendant controller with 3 metre cord.
    (Part Number: P324PTDC382S) – $2,178 Inc GST
  4. 3Kw P&T (Double Acting) Three Station with double solenoid pendant controller with 3 metre cord.
    (Part Number: P324PTDC383S) – $2,618 Inc GST

Wireless Pendant Controllers

wireless pendant controller single station double acting

Single Station Double Acting
(12 & 24 Volt DC)

Part Number: WPC1
$1200 Including GST

Two Station Double Acting
(12 & 24 Volt DC)

Part Number: WPC2
$1400 Including GST
wireless pendant controller three station double acting

Three Station Double Acting
(12 & 24 Volt DC)

Part Number: WPC3
$1600 Including GST

Wireless Controll Specifications

Wireless Receiver Unit

  1. Sensitivity of RF-110dbm 100m
  2. Antenna Internal type
  3. Power Supply: 12 to 24 Volt DC
  4. Power Consumption <12mA
  5. Connector: Waterproof SD16 connector with 5/7/9 pins
  6. Cable length: 4 metres
  7. Sensing Distance: Up to 20 metres

Wireless Pendant Unit

  1. Operating Distance: 0 to 20 metres
  2. Powered with Rechargeable Battery Supply 
  3. Inbuilt Ni-MH Battery, 3-6 Volt DC, 600mAH
  4. Power ON/OFF switch option available to save the battery voltage
  5. Battery charging through a micro USB connector
  6. Indication of RED LED for charging & GREEN once charged

Product Enquiry

Eg. 5x Part Number
Please enter your physical address for your us to quote on freight delivery.
=

Login to your account